Page 35 of 113
Communication Hub Holder for Hoods
This optional accessory is used to attach the communication hub to one of the
four legs of the laminar flow hood or isolator in order to free space on the floor.
Its unique design is compatible with many types of support rods.
Communication Hub Holder for Isolators
This optional accessory is used to attach the communication hub to the bottom
plate of the Steritest
®
Symbio ISL or FLEX pump after it is installed inside the
isolator table cutout. The multiple fastening options make this optional accessory
compatible with many isolators configurations; the depth adjustment frees space for the
operator’s legs while keeping all connection ports accessible. There are many different installation
possibilities.
NOTE
For more information about this accessory, refer to the Steritest
®
Symbio
ISL Pump Installation Guide, Document PF16599 or Steritest
®
Symbio
FLEX Pump Installation Guide, Document PF17222. Or contact Technical
Support at www.millipore.com/techservice
To Next Page
Loading...