12
1. Import of a job
When printing, import the job to the internal PC.
This section describes how to import a job from a removable disk and how to import through a network.
Although it is possible to directly select a job on a removable disk, printing may be
delayed. It is recommended that you print after importing.
* Delay: There is a delay in data transfer, and there is a possibility that the print will
be delayed by about 1 second for each scan.
1-1. Import from the removal disk
Import the job created with RIP to the PC with the internal PC according to the following procedure.
Step 1: Insert the removable disk (USB memory) into the internal PC.
Insert the removable disc containing the job into the USB port of the internal PC.
USB with password is not supported.
Step 2: Tap the [JOB IMPORT] button.
After selecting a job, tap the [JOB IMPORT] button to display the <Import> dialog.
<Import> dialog
To Next Page
Loading...
