MIMAKI ML Tiger-1800B MKII - Setting Menu: Print Options; Print Settings: Color Bar, Feed, Gap, etc.

49
[SETTING] MENU
Make various settings.
[Print]
No. Name Description
initial
value:
Recommended
value
1 Print
The [Color bar], [Nozzle recovery], [Pre feed],
[Dry feed], and [Head gap] menus are displayed.
- -
2 Color bar
The following items can be set. - -
- Color bar On / Off On On
- Color bar position (both ends / left) Both Both
- Color bar refresh level (0-3) 3 3
3 Nozzle recovery Set nozzle recovery On / Off. Off Off
4 Pre feed
The following items can be set. - -
- Pre feed on / off On On
Pre feed length (1 to 1000mm) 5.0 5.0
5 Dry feed
The following items can be set. - -
- Dry feed on / off Off Off
- Length of dry feed (0.1-10.0m) 0.1 0.1
6 Head gap Set the head gap (0.0 to 15.0mm ). 1.5 1.5