MIMAKI ML Tiger-1800B MKII - Clearing System Alarms; Procedure for Alarm Clearance

26
How to clear the alarm
When an error occurs, take action according to the error level, and then clear the alarm from the alarm details
screen.
Tap the [CLEAR ALARM] button.
The processing screen is displayed until the alarm clear is completed. -> Completed
<CLEAR ALARM> dialog
If the alarm clear is successful, the <CLEAR ALARM> dialog closes and the alarm information displayed on the
alarm details screen is cleared.
If an incorrect or inadequate action is taken, the alarm cannot be cleared and the alarm may be
displayed again. In such a case, take the action according to the error description again.
If operation of the machine is unstable even after clearing the alarm, reset the machine
from the [SYSTEM] – [POWER] – [Reset machine] menu.
Tap the [CLEAR ALARM] button