MIMAKI ML Tiger-1800B MKII - Auto Maintenance Settings; Recommended Settings and Screen Access

29
Auto maintenance setting
By using Auto maintenance, cleaning is automatically performed during printing or idling, and the nozzle
condition is maintained or improved.
The cycle starts when Auto maintenance is set.
* If cleaning is performed at any time, the cycle will be restarted.
Recommended settings
The following is the recommended setting for ensuring ejection stability.
Ink type
Printing
Idling
Mode
Interval
Print time [min]
Mode
Flushing
Times
Time [min]
MLRc500
Normal
30
Normal
3
30
MLSb510
Normal
30
Normal
3
30
MLSb520
Normal
30
Normal
3
30
∗ The Auto maintenance setting during printing can be set according to the distance, but the timing is different
depending on the printing mode.
Auto maintenance setting screen display
Select [Auto maintenance] - [Cleaning (Print)] or [Cleaning (Idle)] in the MAINTENANCE MENU to display the
setting screen.