28
Step 2: Select the Cleaning Mode.
Select a cleaning mode from the Mode selection field on the cleaning execution screen.
Main application of each cleaning mode
1 Soft When refreshing the nozzle surface, such as before printing
2 Normal When multiple nozzles are clogging about 1 min.
3 Hard
If nozzle clogging is not recovered by normal cleaning, there is a lot
of nozzle cloggings or when filling the head
About 1 minute
30 seconds
Step 3: Perform the cleaning.
Execute cleaning from the execution button in the cleaning execution screen.
Cleaning starts and the cleaning screen appears.
When cleaning is completed, the cleaning screen disappears.
To Next Page
Loading...
