MIMAKI ML Tiger-1800B MKII - Function Comparison: Print Tab; Print Tab Feature Comparison

80
QPrint - MPC function comparison list
[Print] tab screen
No. QPrint menu Function MPC menu
1
Printing area
Width
Displays the width of the
print file.
Print condition screen 2 N.repeats
Select the number of print
file repetitions.
3 Height
Select the output length of
Print file.
4 Pos.X Select the print origin.
Print condition screen
[SETTING] - [Media] - [Media
setting]
5
Image
Print file Select the print file. [PRINT] - [JOB LIST]
6 Test Draw
Apply a test print pattern to
the print file.
[QUICK MENU] - [Test print]
7 Pattern
Select bidirectional
adjustment pattern.
[SETTING] - [Bi-direction
adjustment] - [XXXX pattern]
8 PatternDraw
Apply the selected
bidirectional adjustment
pattern to the Print file.
9 Adjust
Apply the adjustment
pattern selected with
AdjustmentTool to the Print
file.
[PRINT] - [TEST PATTERN] -
[ServiceDraw]
10
ColorBar_Positio
n
Set the flushing
condition_OFF / Both / Left
[SETTING] - [Print] - [Color bar]
11
ColorBar_Printin
g Level
Set the flushing
condition_Level 0 ~ 3
12
Printing
quality
Pass Select the number of pass.
Print condition screen
13 Layer Select the number of layer.
14 Print Speed
Selecting the print speed
(Standard / Hispeed)
15 Print Direction
Selecting the print
direction (bidirectional /
unidirectional)
16 Feed offset
Correct the media feed
amount
[PRINT] - [JOB STATUS] - [Feed
offset] button
17 Offset
Correct the landing
position for bidirectional
adjustment
[SETTING] - [Bi-direction
adjustment] - [Bi-direction
adjustment]
18 NozzleRecovery
Nozzle recovery function
(On/Off)
[SETTING] - [Print] - [Nozzle
recovery]
19 Advanced Set MAPS. Print condition screen
20 Start Start printing.
Print condition screen
[PRINT] - JOB STATUS (Start
button)
21 End End printing.
[PRINT] - JOB STATUS (Stop
button)
22 Pause Pauses the print.
[PRINT] - JOB STATUS (Pause
button)