MIMAKI ML Tiger-1800B MKII - Network Job Import; Network Import Procedure

15
1-2. Import from network.
A network shared folder is set in the printer's internal PC. Jobs can be imported to the shared folder from another
PC connected to the LAN.
The recommended import method is described below.
∗ Transfer the RIP-completed job folder to the shared folder [SharedJob] on the internal PC.
Depending on the network environment, import may not be possible. In that case,
contact your network administrator.
Step 1: Search the shared folder of this machine. (Operate from other Windows PC)
Use the network search function to search for the computer name “TIGERMK2” from the import source PC (RIP
PC, etc.), or search for the shared folder by specifying the IP address of this machine.
Step 2: Import the job to the shared folder.
Copy the job to the “TIGERMK2” shared folder, [SharedJob].
The copied job can be printed from the [SharedJob] folder in the [PRINT] menu - [JOB LIST] tab.
Ethernet
SharedPrintJob
RIP
-PC
JOB Folder
Machine
SharedJob
RIP PC
Copy
Job folder