MIMAKI ML Tiger-1800B MKII - Print Queue Tab; Managing Jobs in the Print Queue

82
[Print queue] tab screen
In MPC, when you select the next job from the job list during printing, a queuing job is registered.
No. QPrint menu Function MPC menu
1
Printing area
Width
Displays the width of the
print file.
Print condition screen
2 N.repeats
Select the number of print
file repetitions.
3 Height
Select the output length of
Print file.
4 Pos.X Select the print origin.
5
Image
Print file Select the print file. [PRINT] - [JOB LIST]
6 Test Draw
Apply a test print pattern to
the print file.
[QUICK MENU] - [Test print]
7
Printing
quality
Pass Select the number of pass.
Print condition screen
8 Layer Select the number of layer.
9 Print Speed
Selecting the print speed
(Standard / Hispeed)
10 Print Direction
Selecting the print
direction (bidirectional /
unidirectional)
11 Advanced Set MAPS. Print condition screen
12
HISTORY
Works Displays print history.
[PRINT] - [JOB HISTORY]
[HISTORY] - [Print]
13 Cleaning
Displays the cleaning
history.
[HISTORY]-[Maintenance]
14 Emergencies
Displays emergency stop
history.
[HISTORY]-[Alarm]
15 History list
History of Works /
Cleaning / Emergencies is
displayed
[HISTORY]
16 Add Add print file to queue.
Job selection - Print condition
screen - [Print]
17 Delete
Delete the selected print
file in the queue list.
[PRINT] - [JOB QUEUE] - Job
selection (Press and hold or right
click) - [DELETE]
18 Save
Overwrite when the print
condition of the selected
Print file in the Queue list
is changed.
[PRINT] - [JOB QUEUE] - Job
selection → Print condition
screen
19 Queue list
Displays the registered
queue.
[PRINT] - [JOB QUEUE]