MIMAKI ML Tiger-1800B MKII - Machine Settings; Machine Component Settings

53
[Machine]
No. Name Description
initial
value:
Recommended
value
1 Machine
The [Obstacle sensor], [Winder-Unwinder], [Belt
heater], [Vent Fan], and [Light On/Off] menus
are displayed.
- -
2 Obstacle sensor Set the obstacle sensor On / Off. On On
3 Winder-Unwinder
Set whether to enable / disable the
winder/unwinder.
- -
Enable / disable of [Winder disabled] Enable Enable
Enable / disable of [Unwinder disabled] Enable Enable
4 Belt heater
The following items can be set. - -
- Heater On/Off On On
- Delay time (1-5 sec) 5 5
- Heating (0～100%) 60 60
5 Vent fan
The following items can be set. - -
- Vent fan On / Off On On
- Delay time (1-60 sec) 5 5
6 Light On/Off
The following items can be set. - -
- Station light on / off Off Off
- Ink compartment light Off Off