MIMAKI ML Tiger-1800B MKII - Head and Feed Settings; Head Maintenance and Feed Operations

84
No. QPrint menu Function MPC menu
22
Head
maintenance
- placement
Start
Moves the carriage to the
maintenance position.
[MAINTENANCE] - [User
maintenance] - [Carriage
operation] - [To maintenance
position]
23 End
Stops the carriage that is
moving to the
maintenance position.
24
Winder -
Unwinder
Winder
Turns On/Off the
Communication between
the Winder unit and the
machine.
[SETTING] - [Machine] - [Winder-
Unwinder]
25 Unwinder
Turns On/Off the
Communication between
the Unwinder unit and the
machine.
26 Data
Heads height
mm
Set the head gap. [SETTING] - [Print] - [Head gap]
27
Bidirectional
offsets
600dpi Standard
Set the bidirectional
adjustment value for
600dpi Standard
[SETTING] - [Bi-direction
adjustment] - [Bi-direction
adjustment]
28 600dpi HiSpeed
Set the bidirectional
adjustment value for
600dpi HiSpeed.
29
1200dpi
Standard
Set the bidirectional
adjustment value for
1200dpi Standard
30 1200dpi HiSpeed
Set the bidirectional
adjustment value for
1200dpi HiSpeed.
31
Feeds
Pre feed
[unit: mm]
Set the feed amount and
On/Off before printing.
[SETTING] - [Print] - [Pre feed]
32
Final feed
[unit: m]
Set the feed amount and
On/Off after printing.
[SETTING] - [Print] - [Dry feed]