- 19 -
3.
Choose the job of clear ink from the job
list that is not selected in step 2.
• Refer to “a. Setting Glossy Print”and set the
glossy print.
4.
Choose the color job and clear ink of step2+3 from the job list,
• Press [Composite] from function icon.
5.
Check the following.
(1) From the top order of the list
Clear(Glossy) -> Clear(Emboss) ->Color
Check the order
• If the order is not as above, please replace the
composition List by Drag & Drop.
(2) Press [Composite] button.
6.
Synthesized.
7.
Execute printing.
To Next Page
Loading...
