WARNING: A single fault like a power device
short may cause motor rotation when in the
stop mode. The user is responsible for assur-
ing safe conditions for operating personal by
providing suitable guards, audio or visual al-
arms, or other devices. Failure to observe
these precautions could result in bodily injury.
WARNING: To provide the motor with over-
load protection, local, national, and inter-
national codes (e.g.,NEC/CEC)
require that
a motor thermostat, internal
to the motor, be
installed or an electronic thermal
motor over-
load relay, sized to protect the motor, instal-
led between the motor and the drives’ out-
WARNING
:
with power applied. Failure to observe this
precaution may result in fire or serious injury.
put terminals.
Do not connect this equipment
To Next Page
Loading...
Need help?
General
