Setup 11-9
Remove item (from the library or user-defined) in the Selected Items list:
Select an item in Selected Items list, and click [<] to remove it to the Available Items list.
Click [<<] to remove all items in Selected Items.
Delete a user-defined item in the Available Items box. You can only delete the user-
defined items rather than the items in the system library. After a user-defined item is
deleted, it will not be available.
Select a user-defined item in the Available Items box, and click [Delete]. After the
user-defined item in the Available Items box is deleted, the same item in the Selected
Items box on the right will disappear as well.
7. After you customize comments, click [Save] to confirm and exit the [Comment Preset]
screen.
11.6 Print Preset
The settings of a printer include print service and print driver.
Print Service Setting
Add Service: click to begin print service adding.
Remove Service: click to delete the selected print service.
Rename Service: click to rename the selected print service.
Property: to preset the property of print services.
Printer Driver Setting
Printers listed in the operator’s manual are all supported by the system, no drive is
required.
Click [Print Driver] page to enter printer driver setting screen:
Display the printer name as well as print status.
You can add printer including network printer.
To Next Page
Loading...
