11-10 Setup
Check the printer attribute.
For details about DICOM print, please refer to “10 DICOM”.
11.7 Network Preset
For Local TCP/IP preset and DICOM preset, please refer to “10.1 DICOM Preset”.
11.7.1 iStorage Preset
The iStorage screen is as follows:
Service Name Name of the device, which cannot be empty
IP Address
IP address of the PC installed with iStorage software, which cannot
be empty
Connect
Click to verify connection with the PC server. On PC server, if the
storage path has not been confirmed, a dialog box will pop up and
guide the user to set it. If the storage path on PC has already been
set, the system displays a successful connection message after
clicking this button.
Click it to add the new service to the service list.
Update Click to save the changed parameters.
Delete Click to delete the selected service in the service list.
Default Click to set a selected item in the list as the default iStorage server.
Save Click to save and exit the screen.
To Next Page
Loading...
Need help?
General
