Image Optimization 5-11
Effects
Speed changing makes it easier to identify disorders in cardiac cycles.
IP
IP is a combination of several image processing parameters ,which is used for a
convenient image optimization. The IP combination number is displayed on the
image parameter area on the right part of the screen.
The M IP combination parameters include dynamic range and M soften.
Select among the IP groups through the [IP] item in the menu.
The system provides 8 groups of IP combinations, and the specific value of
each parameter can be preset.
Colorize and Colorize Map
Description
Colorize function provides an imaging process based on color difference rather
than gray distinction.
Turn on or off the function through the [Colorize] item in the menu;
Select the colorize map through the [Colorize Map] item in the menu.
The function is available in real-time imaging, freeze or cine review status.
Gray Rejection
This function is to reject image signals less than a certain gray scale, then the
rejected signal corresponding area turns black.
Click [Gray Rejection] on the image menu to adjust.
The adjusting range is 0-5.
Curve
Description
To manually enhance or restrain the signal in the certain scale.
Operation
Click [Curve] in the menu to open the dialogue box to adjust.
Drag the curve node to increase or decrease the gray scale information: drag
the node up to increase the information and down to decrease.
γ
The γ correction is used to correct non-linear distortion of images.
Click [γ] on the image menu to adjust.
The adjusting range is 0-3.
Gray Invert
Reverse the polarity of the image.
Click [Gray Invert] to turn on or off the image inversion.
The gray rejection, curve, γ and gray invert functions are available in real-time
imaging, freeze or cine review status.
These post process adjustment will not influence the cine review.
Gray Map
Adjusting grayscale contras to optimize the image.
To Next Page
Loading...
Need help?
General
