Disassembly of DP-8800Plus
4-5
1 - Transducer Holder 2 - Keyboard 3 - Cables 4 - M4×8 Screws
4.6. Disassembly of Trackball
1. Remove the keyboard.
2. Disconnect the cable of the trackball.
3. Remove the two M3×10 screws and take out the trackball.
1 - M3×10 Screws 2 - Cables 3 - Trackball
4.7. Disassembly of TGC Board
1. Remove the six TGC sliders.
To Next Page
Loading...
