Mindray DP-9900Plus - System Self-Check; LCD Test

System Maintenance
6-6
1. To install DICOM
Move the cursor to [Installation DICOM] and press [Set] key. Select the .key file from
corresponding directory to complete the installation.
2. To uninstall DICOM
Move the cursor to [Uninstallation DICOM] and press [Set] key to uninstall DICOM.
6.2.3. System Self-check
1. Enter the maintenance menu as the procedure described in 6.2.1. Move the cursor to
[Self Test] and press [Set] key to enter the system self-check
2. View the self-check report after the self-check is completed.
3. Restart the system.
6.2.4. LCD test
After the LCD monitor is installed onto the main unit, you can check the LCD screen
through the LCD test function. The operations are:
1. Press <Preset> on the control panel to open the preset menu. Click [Maintenance]
and input the maintenance password to open the maintenance menu.