Mindray T1 Quick Reference Guide

6
T1 Quick Reference Guide
Panorama Central Station Interface: Pacemaker enhancement on the T1
bedside monitor, Panorama Central Station, WorkStation, and ViewStation are
independent.
Initiate ECG Relearn (Arrhythmia Option Required)
To initiate ECG relearning manually on the T1 monitor:
a. Select ECG waveform or ECG numeric tile to enter the ECG Setup menu
Or
a. Select ECG Setup >> from Parameters >> in Main Menu
(quick key)
to enter the ECG Setup menu
b. Scroll and select Relearn
c. Select Main Menu
(quick key) or to return to the main display
Initiate ST Analysis (ST Option Required)
To initiate ST analysis on the T1 monitor:
a. Select ECG waveform or ECG numeric tile to enter the ECG Setup menu
Or
a. Select ECG Setup >> from Parameters >> in Main Menu
(quick key)
to enter the ECG Setup menu
b. Scroll and select ST Analysis >>
c. Select ON for ST analysis
d. Select Main Menu
(quick key) or to return to the main display
NIBP
Factors that Affect Blood Pressure Measurement Accuracy:
The accuracy of non-invasive blood pressure (BP) measurement has been
shown to be affected by numerous factors. Some of the more important
aspects (based on published literature) to consider while measuring BP are:
  • Thecuffshouldfitsnugly,butwithenoughroomfortwofingerstobe
placed between the cuff and the patient’s arm (on adults), and loosely
on neonates with little or no air present within the cuff.
  • UsetheGuidanceTableprovidedtoselectthepropersizecuff.
Too small a cuff has been shown to result in the overestimation

Mindray T1 Specifications

General

Brand	Mindray
Model	T1
Category	Medical Equipment
Language	English