18
T1 Quick Reference Guide
a. Scroll and select Screen Setup >> from Main Menu (quick key)
b.. Select Privacy Mode
c. Select Yes
To remove a patient from Privacy Mode and resume monitoring on the T1
bedside monitor select any key on the T1 bedside monitor
DPM Central Station Interface: Privacy Mode monitor can be enabled/disabled
on the DPM Central Station.
Panorama Central Station Interface: Privacy Mode is not supported at the T1
bedside monitor when interfacing to the Panorama Central Station.
DATE AND TIME
To adjust the date and time on the T1 monitor:
a. Select Main Menu
(quick key)
b. Scroll and select Maintenance >>
c. Scroll and select System Time >>
d. Select Date to set the date and Time to adjust the time
e. Select Date Format to adjust the month, day, and year format
f. Select Time Format to adjust the time format (12h or 24h)
g. Select Main Menu
(quick key) or to return to the main display
Central Station Interface: Adjusting the date and time on the Central Station
will adjust the date and time on the T1 bedside monitor. The date and time
cannot be adjusted at the T1 bedside monitor when interfacing with the Central
Station because date and time are controlled by the central station.
PARAMETER COLORS
The T1 monitor provides the ability to adjust the parameter’s numeric and
waveform (if applicable) color.
To adjust the parameter’s color on the T1 monitor:
a. Select Main Menu
(quick key)
b. Scroll and select Screen Setup >>
c. Select Measurement Color Setup >>
d. Select parameter
To Next Page
Loading...
Need help?
General
