To Next Page

To Previous Page

Patient Setup .....................................................1

Admit Patient and Enter Demographics(Manual Entry) ........... 1

Enter Demographics (Hospital Information System Interface) ....1

Adjust Patient Size ..............................................2

Discharge a Patient .............................................2

Standby ..........................................................3

Enter Standby .................................................. 3

Resume Monitoring ............................................. 3

Print ..............................................................4

Realtime Waveforms ............................................ 4

Adjust Printed Waveforms ....................................... 4

ECG ..............................................................4

Adjust ECG Lead ................................................4

Enable Pacemaker Detection And Set Pacemaker Rate ........... 5

Initiate ECG Relearn ............................................. 6

Initiate ST Analysis ..............................................6

NIBP ..............................................................6

Factors that Affect Blood Pressure Measurement Accuracy ............ 6

Initiate a Non-Invasive Blood Pressure Measurement (NIBP) ......8

Set a Non-Invasive Blood Pressure Measurement Interval ........ 9

Invasive Blood Pressures .........................................9

Adjust Invasive Blood Pressure Label ............................ 9

Zero Invasive Blood Pressure ...................................10

Alarms ..........................................................10

Adjust Alarm Limits ............................................10

Adjust Alarm Responses .......................................11

Adjust Arrhythmia Alarms ......................................12

Disable Non-Lethal Arrhythmias ................................12

Table of Contents

Mindray T1 Quick Reference Guide

Other manuals for Mindray T1