Mindray VS 8 User Manual

VS 8/VS 8A Vital Signs Monitor Operator’s Manual 3 - 15
PR Pulse Volume Sets the pulse volume. Both
Irr. PR Switch Selects whether to enable the Irregular PR
function. If enabled, you can mark the pulse
as regular or irregular on the PR screen.
Spot Check
Temp Measurement Site
(Manual)
Sets the default measurement site for Temp
measurement.
Both
RR Timer Reminder
Interval
Sets the interval of reminder tone for the
timer used for manual RR. For details, see
10.3 Setting Timer Interval.
Both
Apnea Delay
(Adult)/(Ped)/
(Neo)
Sets the delay for giving an Apnea alarm. Continuous
Monitoring
Pain Default Method Sets the default pain scale for scoring. Both
Pain Score Setup See 16.7.2 Managing the Scoring Tools.
EWS Default Adult
Score
Sets the default scoring protocol for adult
patients.
Spot Check
Default Ped Score Sets the default scoring protocol for
pediatric patients.
Default Neo Score Sets the default scoring protocol for
neonatal patients.
EWS(Ad
ult)
Score Sets the default scoring protocol for adult
patients.
Continuous
Monitoring
Auto Scoring Selects the condition to start auto scoring. If
none of the options is checked, auto scoring
is switched off. For details, see 12.1.4 Enabling
Auto Scoring.
Interval Sets the auto scoring interval. For details, see
12.1.5 Setting Auto Scoring Interval.
Auto Refresh
Scores
Selects whether to enable the
auto
refreshing score function. For details, see
12.1.6.2 Auto Refreshing Scores.
Alarm Selects whether to enable EWS alarms. For
details, see 12.1.6 EWS Alarm.
EWS Score
3 in single
parameter
Tab Menu Item Description Work Mode
3 - 16 VS 8/VS 8A Vital Signs Monitor Operator’s Manual
3.9.1.4 Changing Alarm Settings
For workflows under Continuous Monitoring, you can enable or disable an alarm, and
set the alarm limits and priorities of physiological alarms of each parameter.
Follow this procedure:
1. After setting the screen layout, in the Edit Workflow menu, select Alarm Setup.
2. Select Adult, Ped, and Neo tabs to set the alarms for adult, pediatric and neonatal
patients.
NOTE
• SpO2 Desat and Apnea alarms cannot be disabled by default.
3.9.2 Adjusting the Screen Brightness
To adjust the screen brightness, follow this procedure:
1. Select the Main Menu quick key → from the Device column select Display.
2. If you are using the AC power, set Brightness. If you are using the battery to run
the monitor, set Brightness On Battery. You can set the brightness to 1 to 10, in
which 10 is the brightest, and 1 is the least bright.
EWS(Pe
d)/(Neo)
Score / Continuous
Monitoring
Auto Scoring Selects the condition to start auto scoring. If
none of the options is checked, auto scoring
is switched off. For details, see 12.1.4 Enabling
Auto Scoring.
Interval Sets the auto scoring interval. For details, see
12.1.5 Setting Auto Scoring Interval.
Manual
Input
/ Selects the parameters and their position to
be displayed in the Manual Input list.
Both
Parameter Library See 16.8.4 Adding a New Manual Parameter.Both
Paramet
er Color
NIBP White Both
SpO2 Blue Both
Temp White Both
RR Yellow Both
Tab Menu Item Description Work Mode
To Purchase, Visit Avobus.com or call 1-800-674-3655

Mindray VS 8 Specifications

General

Brand	Mindray
Model	VS 8
Category	Monitor
Language	English