4-2
SN P/N Description Qty
3 M6M-010014--- Seal for vaporizer manifold 4
4 M6M-010031--- Seal for valve cover 2
5 M6M-010033--- Valve seal 2
6 M6M-010058--- Seal for bag arm 2
7 M6M-010038--- Seal for water collection cup 1
8 0601-20-78843 Sealing cushion for sodalime canister outlet 1
9 0601-20-78842 Sealing component for sodalime canister 1
10 M6M-010032--- Seal for sodalime canister support 1
11 M6M-010063--- Seal for pressure sampling connector 4
12 M6M-010006--- Seal for fresh gas and ACGO 2
13 M6M-010058--- Seal for drive gas and APL discharge 2
14 0601-20-78848 Seal for bellows housing 1
15 0601-10-69901 Folding bag 1
16 0030-10-13077 Seal for axis of bag/mechanical ventilation switch 2
17 0601-20-78840 BYPASS large sealing cushion 1
4.1.1.1 Parts Replacement
1. As required, replace the gas supply inlet filter (0611-20-45600) and seal for gas supply
inlet assembly (M6M-010021---) every 12 months. Unscrew the gas supply inlet
counterclockwise using a wrench to disassemble the gas supply inlet assembly as shown
below (take O2 supply inlet as an example).
To Next Page
Loading...
