16
Controler
Batteries
Check to see if there are any signs of burned
or damaged wirers going to the batteries and
to the fuse boxes just before the batteries.
Check the wirer going to the motor is not da-
maged, signs of overheated or warned spots.
Perform a brake test. Stopping distance must be less than 2 meters at 10 km/h and less than 3,5
meters at 15 km/h.
Test the mechanical brake and adjust if necessary.
Check if the brushes are okay or need changing.
Whether it is a Schmid or a Mini Crosser trans-axle, the brushes must be replaced when they are
worn down to 10 mm.
Full length
10 mm
To Next Page
Loading...
