Mini Crosser 125 - Plugs and Fuses in the Operating Panel

18
6.2 Plugs and fuses in the operating panel
Some of the plugs on the PCB are for extra equipment. Some of them have been connected at
the factory and they have been led to the areas of the scooter where they will be used.
The table below shows the cases in which the operating panel should be opened.
The connection for seat adjustment is not relevant to seat adjustment on the S model type. The
up/down contact on the T model is also located beneath the armrest.
Electric bulbs
Headlights (description of method) BA 15s 24 V/21 W MC product number SR-00066
Indicators, braking lamps: BA 15s 24 V/01 W MC product number SR-00033
Rear lamps: BA 15s 24 V/5 W MC product number SR-04244
F6
J12
J11
J10
J9
J6
J7
J8
J3
J2
J
J5
J13
J17
J16
J18
J19
J15
MiniCrosser A/S
T-127-5-002
Issue 2.0