20
Please note that the Mini Crosser may be equipped with several different types of charger (con-
tact the supplier for information on the various types of charger).
Never place the charger on the seat during charging.
Never use chargers that have not been supplied by the manufacturer without contacting your
supplier fi rst.
Never use a charger that has not been designed for charging dry, maintenance-free batteries.
The maximum charge current is 12 A.
The fi gure below shows the polarity of the charge socket.
8.0 Storage
The Mini Crosser scooter is designed for use in all kinds of weather. It should be stored and
charged under cover, at a temperature above 0o Celsius. In addition, the charger must be kept
dry. If necessary tyres can be protected by blocking up the scooter. We also recommend covering
the scooter to protect it against dust, dirt, and sunlight.
9.0 Cleaning
The Mini Crosser can be cleaned with a damp cloth wrung out in a little water containing deter-
gent. The plastic shrouds can be polished with an ordinary window cleaning substance or wax for
car windows.
Using a high pressure cleaner or a hose to clean the Mini Crosser can damage its electronic com-
ponents.
Charge plug NEUTRIK NC6MX seen from the pin side.
1
2
3
0 V
24 V
INHIBIT
To Next Page
Loading...
