Need help?Do you have a question about the Mini Speed Dome Camera and is the answer not in the manual?
General| Digital Zoom | 16x |
|---|---|
| Ingress Protection | IP66 |
| Image Sensor | 1/2.8" CMOS |
| Pan Range | 360° |
| Tilt Range | -15° to 90° |
| Resolution | 1920x1080 |
| Frame Rate | 30fps |
| Power Supply | DC12V/ PoE |
| Aperture | F1.6 |
| Min. Illumination | 0.01Lux |
| Video Compression | H.265/H.264 |
| Network Protocols | HTTP, DNS, DDNS, NTP, RTSP, FTP, DHCP, PPPoE, SMTP, UPnP, SNMP, 802.1X, QoS, IPv6 |
| Interface | 1 RJ45 10M/100M Ethernet |
| Day/Night | IR cut filter with auto switch |
Instructions to avoid electrical shock by not opening covers and referring to qualified personnel.
Warning against exposing camera to rain or moisture to prevent fire or electric shock.
Read instructions, retain them, use approved accessories, and follow installation guidelines.
Ensure proper connections, stop use if malfunction, avoid tampering, and handle with care.
Avoid extreme temperatures, humidity, dust, radiation, magnetic fields, and vibrations.
Details CCD sensor, zoom, day/night function, focus modes, and resolution.
Explains high-speed pan/tilt, vector drive technology, and slow-speed jog operations.
Outlines capabilities for storing presets, patterns, swings, and setting privacy masks.
Details RS-485 communication and supported Pelco protocols for PTZ control.
Explains OSD menu for displaying status and configuring functions interactively.
Details I/O functions for rejecting noise and handling sensor inputs.
Information on using reserved preset numbers for special functions and configurations.
Illustrates and lists parts for the speed dome mounting base, including screws and connectors.
Details the components included for wall mounting the speed dome camera.
Setting up camera ID and communication protocol using DIP switches.
Explains binary number system for camera ID and range 1-255.
Details DIP switch combinations for PELCO-D and PELCO-P protocols.
Instructions for power connection (DC 12V) and RS-485 communication wiring.
Connecting the camera using a BNC coaxial cable.
Verifying cable connections, camera ID, and protocol matching before powering up.
How to test preset and pattern functions using a controller or DVR.
Using the OSD menu and special reserved preset numbers for configuration.
Storing, running, and deleting up to 255 preset positions with independent characteristics.
Setting up and running repetitive camera movements between two preset positions.
Memorizing and recalling camera movement paths using joystick or OSD.
How to run, delete, and manage recorded camera patterns.
Sequencing presets, patterns, or swings into groups with dwell time and repeat settings.
How to execute stored group sequences and remove them.
Resuming previous actions on power-up and auto-flipping the image based on tilt angle.
Automatic camera positioning for parking and creating privacy masks on the image.
Configuring Global/Local image settings (WB/AE) and Semi-Auto Focus modes.
Details P/T/Z info, Camera ID, Action Title, Preset Label, Alarm Input, and Image Flip displays.
How the OSD shows the current state of alarm inputs (ON/OFF).
Rules for navigating menus, using the joystick, and saving/canceling settings.
Overview of the main menu items including System Information, Display Setup, Camera Setup, and Initialize.
Enabling or disabling various OSD display items on the main screen.
Setting the North direction for compass orientation.
Selecting mask number, display status, and clearing masks for privacy zones.
Adjusting the width and height of the privacy mask area.
Configuring focus modes (Auto, Manual, SemiAuto) and digital zoom function.
Setting up white balance modes and adjusting red/blue gain.
Adjusting backlight compensation, day/night modes, and image brightness.
Configuring IRIS, shutter speed, AGC, SSNR, and SENS-UP for optimal image quality.
Managing motion lock to prevent function changes and setting power-up actions.
Configuring jog speed, direction, and freezing the image at preset start points.
Enabling parking action, setting wait time, and choosing parking actions like HOME or PRESET.
Setting alarm input types (OPEN/CLOSE) and assigning actions based on alarm triggers.
Selecting, defining, and clearing preset numbers and their associated data.
Redefining preset positions and editing descriptive labels for presets.
Configuring Global/Local WB and AE settings for individual presets.
Selecting swing numbers and defining the 1st and 2nd preset positions for swings.
Setting the speed for swing movements and clearing swing data.
Selecting pattern numbers and starting the pattern editing process.
Memorizing camera paths using the joystick for pattern creation.
Selecting group numbers and defining actions, dwell time, and options for sequences.
Setting up multiple actions within a group and saving the configuration.
Procedures for clearing display, camera, motion, and edit data.
Steps to reboot the camera module or the entire speed dome system.
Specifications for video signal system, CCD, effective pixels, resolution, and camera features.
Details on pan/tilt speed, presets, patterns, groups, communication, power, and operating temperature.
Diagrams showing the external dimensions of the speed dome camera.
To Next Page