the folded-away state and the wipers are
folded in when switching on.
NOTICE
If the wipers are frozen to the windshield,
the wiper blades can be torn off and the
wiper motor can overheat when switching
on. There is a risk of damage to property.
Defrost the windshield prior to switching
the wipers on.
Folding out the wipers
To fold the wipers away from the wind-
shield, proceed as follows:
1. Activate standby state.
2. Push the wiper lever down or forward
and hold it until the wipers stop in an
approximately vertical position.
3. Fold the wipers all the way out from the
windshield.
Folding in the wipers
To fold in the wipers, proceed as follows:
1. Fold the wipers back in toward the
windshield.
2. Turn on standby state, then press the
wiper lever down or forward again and
hold it.
The wipers return to their rest position
and are ready for operation.
Seite 160
CONTROLS Light and view
160
Online Edition for Part no. 01405B37A59 - II/24
To Next Page
Loading...
Need help?
General
