Turning off the system automatically
Park Distance Control switches off automat-
ically when driving forward or if a certain
distance or speed is exceeded.
Turning the system on/off manually
To manually turn on Park Distance
Control, press the Park Assist key on
the switch cluster.
The parking assistance systems view is dis-
played.
When the LED above the Park Assist key il-
luminates, the system is on. When the LED
goes out, the system is off.
If the system is manually switched on when
the reverse gear is engaged, the rearview
camera image is displayed.
Depending on the national-market version,
the system cannot be turned off manually
when the reverse gear is engaged.
Acoustic warning
General information
An intermittent tone is given as acoustic
warning for Park Distance Control to signal
an approaching object. E.g., when an object
is detected at the rear left of the vehicle, a
sound is heard from the rear left speaker.
The shorter the distance to the object, the
shorter the intervals of the intermittent
tones.
An acoustic warning sounds in case of an
impending collision at a distance to the ob-
ject of approx. 27 in/70 cm.
For objects behind the vehicle, the acoustic
warning is issued as early as a distance to
the object of approx. 5 ft/1.50 m.
When the distance to a detected object is
less than approx. 8 in/20 cm, a continuous
tone is sounded.
When there are objects in front of and
behind the vehicle at the same time, at a
distance smaller than approx. 8 in/20 cm,
an alternating continuous tone will sound
between the front and rear speakers.
The intermittent tones and the continuous
tone are turned off when selector lever posi-
tion P is engaged.
Depending on national-market version, the
intermittent tones are switched off after a
short time when the vehicle is stationary.
If an object approaches when the vehicle
is stationary, the acoustic signal is reacti-
vated.
Adjusting the volume
1. To adjust the volume of the acous-
tic warning, go through the menu
as follows: Apps menu / "Vehicle" /
"Driving settings" / "Driver Assistance" /
"Parking" / "PDC signal volume".
2. Set the desired value.
Depending on national-market version:
Turn off acoustic warning
Depending on national-market version, the
acoustic warning can be turned off while
performing a parking maneuver.
Tap the acoustic warning icon on the
right edge of the Interaction Unit. The icon
turns gray and the LED below the icon goes
out.
When the Park Distance Control is switched
on again, the acoustic warning is automati-
cally switched on again.
Visual warning
General information
If Park Distance Control is activated, the
Interaction Unit will indicate when the ve-
hicle is approaching an object.
Seite 231
Parking CONTROLS
231
Online Edition for Part no. 01405B37A59 - II/24
To Next Page
Loading...
Need help?
General
