Turning parking operation display
on/off
When the Automatic Parking Assistant is
enabled, the parking maneuver is displayed
in the camera view on the Interaction Unit.
To turn the parking maneuver display on/
off, go through the menu as follows: Apps
menu / "Vehicle" / "Driving settings" /
"Driver Assistance" / "Parking" / "Show
assistance information".
Turning the signal tone on/off
To turn the signal tone for suitable park-
ing spaces on/off, go through the menu as
follows: Apps menu / "Vehicle" / "Driving
settings" / "Driver Assistance" / "Parking" /
"Sound when available".
Parking using the Automatic
Parking Assistant
When parking with Park Assist, you must
select a parking method depending on the
available parking spaces.
1. For the parking space search when driv-
ing past parked vehicles at a speed of
up to approx. 22 mph/35 km/h and a
distance of max. 5 ft/1.5 m.
The parking space search is acti-
vated.
2. Press the Park Assist key on the
switch cluster or engage reverse gear.
The parking assistance systems view is
displayed.
The parking space search and possible
parking spaces are shown on the Inter-
action Unit.
3. Select one of the parking methods of-
fered on the Interaction Unit. You can
switch to another parking maneuver as
necessary.
The status symbol for the Automatic
Parking Assistant illuminates green. The
system takes control of the parking op-
eration.
4. Follow the instructions on the Interac-
tion Unit.
The speed can be reduced with the
brake. Other interventions will cancel
the system.
Depending on national-market version,
an intermittent or continuous tone
sounds for Park Distance Control.
At the end of the parking operation, se-
lector lever position P is set.
The end of the parking maneuver is indi-
cated on the Interaction Unit.
5. Adjust the parking position yourself, if
needed.
Driving out of a parking space
using the Automatic Parking
Assistant
1. Switch on drive-ready state to pull out of
the parking space using Park Assist.
2. When your vehicle is stopped,
press the Park Assist key on the switch
cluster or engage reverse gear.
The parking assistance systems view is
displayed.
3. On the Interaction Unit, select the de-
sired parking method.
4. Follow the instructions on the Interac-
tion Unit.
The status symbol for the Automatic
Parking Assistant illuminates green. The
system takes control of the maneuver.
The speed can be reduced with the
brake. Other interventions will cancel
the system.
Seite 238
CONTROLS Parking
238
Online Edition for Part no. 01405B37A59 - II/24
To Next Page
Loading...
Need help?
General
