EasyManuals Logo

Mini COOPER 2024 User Manual

Mini COOPER 2024
368 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #298 background imageLoading...
Page #298 background image
4. Stow the tire repair set in the trunk.
5. Immediately drive 6 miles/10 km to en-
sure that the tire sealant is evenly dis-
tributed in the tire.
Do not exceed the speed limit of
50 mph/80 km/h.
If possible, do not drive at speeds less
than 12 mph/20 km/h.
Tire sealant may spray from the dam-
aged area when you rotate the wheel
initially.
Adjusting the tire pressure
To adjust the tire pressure after using the
tire repair set, proceed as follows:
1. Stop at a suitable location.
2. Connect the hose directly to the com-
pressor and turn clockwise by 90° until
it audibly engages.
3. Unscrew the valve cap on the wheel and
screw the connecting piece of the hose
onto the valve.
4. Insert the connector into the socket in
the vehicle interior.
5. Read the tire pressure on the tire pres-
sure display of the compressor.
Do not continue driving unless a mini-
mum tire pressure of 1.3 bar/19 psi is
displayed. Contact an authorized service
center or another qualified service cen-
ter or repair shop.
6. Correct the tire pressure to
2.5 bar/36 psi.
To increase the tire pressure when
standby or drive-ready state is on:
Turn on the compressor and let it
run for max. 10 minutes.
To decrease the tire pressure: Press
the pressure reducing valve button
on the compressor.
Removing and stowing the tire
repair set
To remove and stow the tire repair set, pro-
ceed as follows:
1. Switch off the compressor.
2. Pull the connector out of the socket in
the vehicle interior.
3. Disconnect the hose from the compres-
sor and the valve on the wheel.
4. Screw the valve cap onto the valve.
5. Stow the tire repair set together with
the hose in the trunk.
Continuing the trip
Continue driving immediately once finished
with the tire repair set.
Do not exceed the speed limit of
50 mph/80 km/h.
Do not exceed the maximum travel distance
of 125 miles/200 km.
Re-initialize the Flat Tire Monitor or reset
the Tire Pressure Monitor.
Replace the faulty tire and the sealant bottle
from the tire repair set as soon as possible.
Additional information:
Flat tire monitor, refer to page 307.
Tire pressure monitor, refer to page 300.
Seite 298
MOBILITY Wheels and tires
298
Online Edition for Part no. 01405B37A59 - II/24

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mini COOPER 2024 and is the answer not in the manual?

Mini COOPER 2024 Specifications

General IconGeneral
BrandMini
ModelCOOPER 2024
CategoryAutomobile
LanguageEnglish

Related product manuals