5. With the integrated key, close and lock
the front passenger door using the side
door lock.
6. Pull the door handles to make sure they
are locked. If necessary, repeat the proc-
ess.
If vehicle is de-energized:
1. With the integrated key, close and lock
all doors, except the driver's door, using
the side door lock.
2. Pull and hold the driver's door handle
outward with one hand.
3. Using the integrated key, lock the driv-
er's door lock clockwise.
4. Pull out the vehicle key and release the
door handle.
5. Close the driver's door.
6. Pull the door handles to make sure they
are locked. If necessary, repeat the proc-
ess.
Alarm system
If the vehicle is unlocked with the
integrated key via the door lock, the acti-
vated alarm system will be triggered when
the door is opened.
In this case, use the vehicle key emergency
detection to switch off the alarm.
If the doors are manually locked from the
inside, the alarm system is not activated.
Emergency detection of the vehicle
key
Principle
If the vehicle key's battery is discharged,
the vehicle key will not be detected. In this
case, drive-ready state can be turned on by
emergency detection of the vehicle key.
Seite 71
Opening and closing CONTROLS
71
Online Edition for Part no. 01405B37A59 - II/24
To Next Page
Loading...
Need help?
General
