Removing the integrated key
1. Press and hold the button, arrow 1, then
push the cover, arrow 2, downward and
remove it.
2. Push the end of the key head, arrow.
The integrated key is raised slightly.
3. Remove the integrated key.
Unlocking the vehicle manually
1. Remove the cover cap on the door han-
dle to make the door lock accessible. To
do this, slide the integrated key into the
opening to the stop from below and re-
move the cover cap.
2. Unlock the door lock with the integrated
key by turning it counterclockwise.
3. Open the driver's door.
4. Press the central locking button to un-
lock the other doors. With the vehicle
de-energized: pull the door opener of the
other doors from the inside.
Locking the vehicle manually
General information
To avoid locking the vehicle key in the ve-
hicle, do not place the vehicle key in the
vehicle.
Locking the vehicle
1. Close all doors.
2. Enter the vehicle on the front passeng-
er's side and close the front passenger
door.
3. Press the central locking button to un-
lock all doors.
4. Exit the vehicle through the front pass-
enger door.
Seite 70
CONTROLS Opening and closing
70
Online Edition for Part no. 01405B37A59 - II/24
To Next Page
Loading...
Need help?
General
