4. Remove the battery from the battery
housing.
5. Insert a CR2032 3V battery with the
positive terminal facing up.
6. Use a coin to close the battery compart-
ment lid, turning the coin clockwise, ar-
row 1. The lid is fully closed when the
arrowheads, arrow 2, point toward each
other.
7. Insert the cover in reverse order, arrow
1 and arrow 2. The cover must audibly
engage at the top and bottom.
Have old batteries disposed of by
an authorized service center or an-
other qualified service center or repair
shop, or take them to a collection point.
Integrated key
Principle
The integrated key is built into the vehicle
key. If the electrical system malfunctions,
the vehicle can be unlocked and locked
manually using the integrated key.
Depending on the national-market version,
the integrated key will fit in the glove com-
partment.
Safety information
Warning
For some national-market versions, un-
locking from the inside is only possible
with particular knowledge.
If persons or animals spend a lengthy time
in the vehicle and are thereby exposed to
extreme temperatures, there is a risk of
injury or danger to life. Do not lock the ve-
hicle from the outside when there are peo-
ple or animals in it. Do not leave babies,
toddlers or animals alone in the vehicle.
Seite 69
Opening and closing CONTROLS
69
Online Edition for Part no. 01405B37A59 - II/24
To Next Page
Loading...
Need help?
General
