When an Indicator Lights Up
5
EP1085 5-3
4 With the Seal on the Toner Bottle
facing up, slowly peel off the Seal as
illustrated.
NOTE
è Be careful, some toner may puff out
from the bottle.
5 Ensuring that the arrows ( ) on the
Toner Bottle are facing you, insert
theBottleintoposition.
NOTE
è Insert the Bottle all the way into the
copier until the marking on the Bottle is aligned with the marking
on the Toner Bottle Holder.
6 Swing the Toner Bottle Holder
closed and close the Front Door.
NOTES
è Try to replace the Toner Bottle with
a new one as soon as possible once
the Add Toner Indicator lights up. Continuing to make copies without
changing the Toner Bottle will result in increasingly lighter images.
è Use ONLY the specified toner for this copier. Using any other toner
could result in image trouble.
Toner Replenisher Function
Use the Toner Replenisher Function if the image is light immediately
after replacing the Toner Bottle with a new one, see page 4-3.
To Next Page
Loading...
