5
When an Indicator Lights Up
5-10 EP2030
4 Pull the staple belt about 3 cm out of
the new Staple Cartridge and break
off that portion.
NOTE
è Check that no portion of the staple belt hangs out of the Cartridge.
Break off any portion of the belt that hangs out of the Cartridge.
5 Insert the new Staple Cartridge until
it clicks into position.
6 Close the StaplerDoor and slide the
Staple Sorter back against the
copier.
7 Place a sheet of paper into the 1st
Bin of the Staple Sorter.
To Next Page
Loading...
