When an Indicator Lights Up
5
EP2030 5-11
8 Press the Manual Staple Key. The
copierautomatically test-staplesthe
paper 2 to 3 times.
9 Remove the sheet of paper from the
1st Bin and check that staples have
been driven into it.
If no staples are evident, place
another sheet of paper into the 1st
Bin and repeat steps 7, 8 and 9.
NOTE
è Replace the Staple Cartridge only after the Add Staples Indicator
lights up. Removing the Staple Cartridge before then will result in
stapling trouble.
è Immediately after the new Staple Cartridge has been loaded, be sure
to follow steps 7 to 9.
è Do not turn the green gear near the Cartridge inside the Stapler Unit.
Meter
Count
Toner
Drum
Dehumidify
Input
Auto
Size
Margin
Job
Memory
Cover
Manual
Staple
Sort
Sort &
Staple
Group
1
Mixed Orig. Det.
2
1
2
11
2in1
12
2in1
Book
1
2
To Next Page
Loading...
