Interleaf EP5000/EP4000 DIS/REASSEMBLY, ADJUSTMENT
97.04.01
D-41
12. Remove the PC Drum Paper Separator Fingers and AIDC Sensor Board PWB-G as shown below.
1156D062AA
Torsion Spring
PWB-G
Assy
* PC Drum Paper Separator Fingers
At removal and reinstallation, use care not to damage the tip of the fingers.
Also, use care not to get hurt by the tip of the fingers.
* Hook the torsion spring properly.
After installation, check that the
Paper Separator Fingers oper-
ate smoothly.
Top View Bottom View
1156D063AA
PC Drum Paper Separator Finger Installed
To Next Page
Loading...
