Interleaf EP5000/EP4000 SWITCHES ON PWBs, TECH. REP. SETTINGS
97.04.01
S-15
[6/6]
Touch Panel
Display
Setting (The default is .)
Highlighted
1/25
⋅
⋅
⋅
22/25
<100 Accounts>
The copy track data of the selected page is displayed (Account No., Total
Counter, Size Counter, Limit, ID).
“Count Reset” : Clears the total and size counters of all accounts.
“No.” : Enter the set account number from the 10–Key Pad.
“Total” : Displays the count of the Total Counter. (It can also be
cleared with the Clear key.)
“Size” : Displays the count of the Size Counter. (It can also be
cleared with the Clear key.)
“Limit” : Enter the maximum number of copies that can be made from
the 10-Key Pad.
“ID #” : Enter the access number (0001 to 9999) from the 10-Key
Pad.
1~
⋅
⋅
⋅
901~
<1000 Accounts>
The copy track data of the selected page is displayed.
“Count Reset” : Clears the total counters of all accounts.
“Total” : Displays the count of the Total Counter. (It can also be
cleared with the Clear key.)
NOTE: The entry of an access number is not possible, with 1 to 1000 corre-
sponding to the ID numbers.
Max. Copy Sets Determine the number of copies or copy sets that can be set using the 10-Key
Pad.
Non-Auto Shut off
“OFF” key is not displayed.OFF
Select whether to enable or disable the Auto Power-off Mode setting available
from User’s Choice.
Disable
“OFF” key is displayed.
Enable
User Help
* Displayed when
a DT-103 is
mounted.
<Transmission Procedure>
1. Using the “ B or Y ” key, select the user claim number and then, from the
10-Key Pad, enter the 3-digit user claim code (up to six entries are pos-
sible).
2. Touch “Data Send” to start the transmission.
To Next Page
Loading...
