Minuteman E24 - 6. Brush Head

6. Brush Head
6. Brush Head Transport Position
•The lever provided is for lifting up the brush head. It features 3 positions for adjusting
the lift linkage (Fig 6/1) The top hole is the transporting and ramp climbing position In
the
lift
linkage
(Fig
.
6/1)
.
The
top
hole
is
the
transporting
and
ramp
climbing
position
.
In
this position, the lift linkage is to be adjusted so that a 1mm gap appears between the
lever and the screw head at the chassis (Fig. 6/2).
Th iddl h l iti i f bbi ith d
•
Th
e m
iddl
e
h
o
l
e pos
iti
on
i
s
f
or scru
bbi
ng w
ith
pa
d
s.
•The bottom hole (Fig. 6/1) is the normal scrubing position of the brush head.
Transport Position
Scrubbing position
with pads
Scrubbing position
with brushes
1 mm
Fig. 6/2
21
with
brushes
Fig. 6/1