Minuteman E24 - 15. Trouble Shooting the Controller

15. Trouble Shooting the Controller
Note: If the 5 amp fuse on the controller blows, It could indicate:
1. A faulty contactor (not closing on the negative side).
2. Poor connection on the battery negative side of the contactor.
3. Poorly crimped terminals on the contactor connections.
4.
Incorrect wiring of the contactor. (See chapter 16
-
17)
4.
Incorrect
wiring
of
the
contactor.
(See
chapter
16
17)
• NOTE - Always use a coating of high temperature dielectric
grease (NYOGEL 760G GREASE) or equivalent on the motor
tthbttfthtllhlith
connec
t
ors on
th
e
b
o
tt
om o
f
th
e con
t
ro
ll
er w
h
en rep
l
ac
i
ng
th
e
board or motor harnesses.
Caution: Connecting the battery pack polarity
incorrectly will permanently damage the controller.
60
incorrectly
will
permanently
damage
the
controller.