Minuteman E24 - 8.5 Water Pump

8.5 Water Pump
8.5 Solution Control
• Models equipped with water pump
• The solution flow rate is affected by the speed of the drive
system.
• The controller adjusts the voltage to the pump to regulate water
volume.
• The faster the machine is driven the more water will flow to the
brushes
brushes
.
• The controller uses stand still recognition circuitry. The pump
will be shut off, if the water supplied to the pump is to low or
inefficient
,
when the volta
g
e su
pp
lied to the
p
um
p
is above the 5
,gpppp
volt level. This feature is disabled if voltage is below 5 volts.
34