Minuteman E24 - 7. Drive and Wheels; 7.1 Electric Brake (E33 and 30 Gallon Tank Models Only)

7. Drive and Wheels
7. General Data
Torque of wheel bolts: 23 foot lbs
Torque of wheel nuts: 18 foot lbs
Wheel speed in max. drive potentiometer position:
Forward: (3.1 mph) 110 min-1 Reverse: (1.55 mph) 55 min-1
Torque of setting for screws on caster mounting: 17 foot lbs
7.1 Electric Brake (E33 and 30 Gallon Tank Models Only)
•The drive motor is equipped with a electric brake on the transaxle. In the display, the
brake is re
p
resented b
y
the s
y
mbol. The transaxle is locked
(
lever down
)
b
y
brake as
pyy ()y
soon as the drive bail handle is in the neutral position.
Release the brake mechanically before pushing the machine. To release, unlock (lever up)
the lever located on the drive motor behind the water filter on the left side of the machine
directl
y
behind the left-hand drive wheel.
y
•If the machine is powered up with the brake in the unlocked position the “flashing H“ will
appear in the hourmeter display. This will prevent the machine from operating for safety
reasons.
• When this occurs the coil volta
g
e will be interu
p
ted on the K1 main rela
y
.
gp y
Resistance of the electric brake coil amounts to approx. 37 to 41 Ω.
27