8. Water Supply
8.1 The solenoid valve releases or stops supply of water flowing to the brushes.
The solenoid valve is located at the front pane of the battery compartment. The
lidliltill tdtth tl tllA1t
A1.X11:1+2. See Fig. 8/1
•Coil resistance of solenoid: approx. 47 Ω
•Current consumption of solenoid: approx. 0.5 A
•Water amount is regulated by ball valve on all
the 19 gallon and models.
Fig. 8/1
8.2 Solution Filter
The clear water supply line to the
brushes is equipped with a filter
screen. In case of problems with the
supplied water amount, check the
screen and the hoses from clear water
tank and to the brushes See Fig 8/2