Minuteman E24 - 11.2 Charger Error Codes

11.2 Charger Error Codes
10.2 Note: The following are error indicators that could occur during the battery
charging process. All errors will be in the form of a blinking display picture
of the battery
of
the
battery
.
The display indicator figure # 1 will display a blinking doted square, if the
battery malfunctions for the following reasons:
1. The battery has less than 1.25 volts per cell.
2. The battery has less than 15 volts after 30 minutes
3. The batteries are wired incorrectly (reversed polarity).
4. The batteries are missing.
5
Th b tt t i i t ll d
5
.
Th
e wrong
b
a
tt
ery
t
ype
i
s
i
ns
t
a
ll
e
d
.
6. The selected programming of the charger is incorrect for the
batteries that are installed.
Fig.1
41