Minuteman E24 - Page 47

11.5 Programming the Charger Cont.
5. Push and hold the button in for 2 to 4 seconds and release. The charger will
turn off.
6. Push and hold the button in again for >10 seconds and release. This puts the
charger into the programming mode. The picture on the machine’s display will
blink rapidly indicating which charging mode has been previously stored in the
charger
7. Push the button for <1 (one) second at a time to select a different charging
mode. The picture will blink slowly, indicating that you’re in the selection mode.
P
us
h
t
h
e
s
wi
tc
h r
epeated
l
y
u
n
t
il
t
h
e
des
ir
ed
m
ode
i
s
d
i
sp
l
ayed
.
charger
.
us t e s tc epeated y u t t e des ed ode s d sp ayed
8. The charger will show a total of 8 (eight) different charging modes. (See
pictures below for the proper mode). The remaining settings do not have any
additional functions.
47