5. Commissioning
MiR Fleet PC Getting Started (en) 01/2021 - v.1.5 ©Copyright 2019-2021: Mobile Industrial Robots A/S. 26
5. Do not select Factory reset the robot before adding it when you are adding the model
robot. Factory resetting a robot removes all of the created site data from it. However, for
all robots added after the model robot, we recommend selecting to factory reset the
robot to minimize the time taken to add the robot and remove unnecessary data.
NOTICE
Be aware that all user settings on the robot are erased when you select the
Factory reset option. This ensures that all robots are running with the
same information as the fleet.
6. Once the robot has finished synchronizing with MiRFleet, select Show info for the robot
you just added, and then select Go to robot interface.
7. Sign in to the robot interface and go to Setup >Maps. Ensure that the active map on the
robot is a part of the active site on MiRFleet—see Activating a site on page 30 to
activate a specific site on MiRFleet.
To Next Page
Loading...