Mircom FX-2000 series

94
Appendix D: Remote Annunciator Panels
15.0 Appendix D: Remote Annunciator Panels
15.1 RA-1000 & RAM-200 Series
The RA-1000 Series of remote annunciators are units with electrical modules and enclosures
matching the configurations of the FX-2000 Series Fire Alarm Control Panels. For detailed
information see Mircom Documents RA-1000 Manual LT-617, RAM-208 Manual LT-648, RAM-
216 Manual LT-658 and MGD-32 Manual LT-847.
15.1.1 RA-1000 & RAM-200 Models
15.1.2 Graphic Annunciators
15.1.3 Enclosures
15.2 RAX-LCD
The RAX-LCD Remote Shared Display is a remote annunciator that provides the same
functions as the main display on the fire alarm control panel, less 16 zone LEDs. It is equipped
with a large 4 line x 20 character backlit alphanumeric LCD display which uses a simple menu
system complete with a directional key pad and switches for Enter, Menu, Cancel and Info. For
more information see Mircom document LT-856.
RAM-1032TZDS Main Annunciator Chassis with common indicators and controls, and 32-
circuit capacity.
RAX-1048TZDS Adder Annunciator Chassis with 48 circuit capacity.
RAM-1016 Non-Expandable Annunciator Chassis with common indicators and
controls, and 16-circuit capacity.
RAM-208/R Non-Expandable Annunciator Chassis with limited common indicators
and controls, and eight-circuit capacity. Standard beige colour RAM-208,
RAM-208R is red.
RAM-216/R Non-Expandable Annunciator Chassis with limited common indicators
and controls, and 16-circuit capacity. Standard beige colour RAM-216,
RAM-216R is red.
MGD-32 Main Graphic Annunciator Chassis with common indicators and controls,
and 32-circuit capacity.
AGD-048 Adder Graphic Annunciator Chassis with 48-circuit capacity.
BB-1001/R Capacity for one annunciator chassis.
BB-1002/R Capacity for two annunciator chassis.
BB-1003/R Capacity for three annunciator chassis.
BB-1008/R Capacity for eight annunciator chassis.
BB-1012/R Capacity for twelve annunciator chassis.