Mircom FX-2000 series

12
Mechanical and Chassis Installation
4.0 Mechanical and Chassis Installation
The following chapter describes the Mechanical and Chassis installation for all FX-2000
FACPs.
4.1 Mechanical Installation Diagrams
Mechanical Installation Instructions for the following enclosures:
• BB-5008
• BB-5014
• UB-1024DS and DOX-1024DS/R
• BBX-1024XT
• BBX-1024XTR
• BBX-1072ADS
• BBX-1072ARDS
4.1.1 BBX-1072ADS and BBX-1072ARDS Mechanical Installation
The BBX-1072ADS and BBX-1072ARDS are suitable for flush or surface mounting, and have
a built-in trim ring.
Material Cold rolled steel18GA (0.048”) thick cold rolled steel
16GA (0.059”) thick for backbox
14GA (0.075”) thick for door
Dimensions of Enclosure (minus built in trim ring) 24.8” x 6.4” x 32.5”
Distance between horizontal mounting screws 16”
Distance between vertical mounting screws 23.6”
Complete Dimensions of Enclosures 26.4” x 7.7” x 34”