Mircom TX3 Series - Using the TX3 Telephone Access System; Frequently Used Functions

Configuration
Version 1.1 Telephone Access System User Guide 12 (42)
LT-968 Copyright 2012
2.1 Using the TX3 Telephone Access System
The TX3 Entry Panel LCD shows a scrollable view of the resident names and dial
codes. The LCD also comes in an 8 line LCD handset version and a paper version
of the resident list is available.
To use the TX3 Telephone Access System
1. To view the resident list press the up or down arrow keys to scroll the list
line by line.
or
To view the resident list page by page use the star key to scroll page up and
number key to scroll page down.
2. Key in the dial code associated with the resident you wish to speak to or
press the Telephone Key when the cursor is on the resident’s name. For the
handset version, first pick up the phone and then key in the dial code or
press the Telephone Key.
3. Once the resident grants entry permission, the door unlocks. For the
handset version, hang up the phone and proceed through the door.
2.2 Frequently Used Functions
The following instructions are for the more commonly used features of the TX3
Telephone Access System.
Features include:
• Entering and exiting configuration mode
• Adding residents
• Edit and delete functions
• Timer settings
• Changing the password.